Automotive Ethernet Chip Market Market Size, Share, Growth, and Industry Analysis, By Types (PHY Chip,TSN Chip), By Applications (Passenger Car,Commercial Vehicle) , and Regional Insights and Forecast to 2035

Automotive Ethernet Chip Market Overview

Global Automotive Ethernet Chip Market size is estimated at USD 3397   million in 2026 and is expected to reach USD 26997.72 million by 2035 at a 25.9% CAGR.

The Automotive Ethernet Chip Market is gaining strong momentum as vehicles transition toward software-defined, connected, and data-centric architectures. Automotive Ethernet chips enable high-speed, low-latency data transmission across in-vehicle networks, supporting bandwidths from 100 Mbps to multi-gigabit levels. Modern vehicles integrate more than 100 electronic control units, generating and exchanging massive volumes of data every second. Ethernet-based architectures are increasingly replacing legacy CAN and LIN systems due to higher data efficiency and reduced wiring complexity. 

The USA Automotive Ethernet Chip Market is witnessing accelerated adoption driven by high vehicle electrification rates and strong penetration of ADAS-enabled vehicles. Over 90% of new vehicles sold in the United States include at least one advanced safety feature requiring high-speed data transfer. The country hosts a large base of automotive OEMs, Tier-1 suppliers, and semiconductor innovators actively integrating Ethernet backbones into vehicle platforms. Increasing deployment of autonomous test fleets, connected vehicle infrastructure, and software-defined vehicle architectures further supports Ethernet chip demand. The USA market also benefits from early adoption of 10BASE-T1S and multi-gigabit automotive Ethernet standards.

Download Free Sample to learn more about this report.

Key Findings

Market Size & Growth

• Global market size 2026: USD 3397 Million
• Global market size 2035: USD 26997.72 Million
• CAGR (2026–2035): 25.9%

Market Share – Regional

• North America: 32%
• Europe: 27%
• Asia-Pacific: 34%
• Middle East & Africa: 7%

Country-Level Shares

• Germany: 24% of Europe’s market
• United Kingdom: 18% of Europe’s market
• Japan: 22% of Asia-Pacific market
• China: 41% of Asia-Pacific market

Automotive Ethernet Chip Market Latest Trends

One of the most prominent Automotive Ethernet Chip Market trends is the rapid shift toward zonal and centralized vehicle architectures. Traditional distributed ECUs are being consolidated into zonal controllers connected via high-speed Ethernet backbones. This architectural shift reduces wiring harness length by up to 30% and vehicle weight by nearly 15 kilograms per vehicle. Automotive OEMs are increasingly adopting 1000BASE-T1 and 10GBASE-T1 Ethernet chips to support real-time sensor fusion for cameras, radar, and LiDAR systems. Vehicles equipped with Level 2+ ADAS typically process more than 4 terabytes of data per day, significantly boosting demand for high-bandwidth Ethernet chips.

Another key Automotive Ethernet Chip Market insight is the integration of Ethernet into electric and autonomous vehicles. Electric vehicles require robust communication between battery management systems, power electronics, and vehicle control units. Automotive Ethernet enables deterministic communication with latency below 1 millisecond, essential for safety-critical applications. Software-over-the-air updates, now supported in over 70% of connected vehicles globally, rely on Ethernet-based in-vehicle networks for faster data transfer. Additionally, the emergence of 10BASE-T1S technology allows multi-drop Ethernet, enabling cost-effective sensor connectivity and expanding Automotive Ethernet Chip Market opportunities across entry-level vehicle segments.

Automotive Ethernet Chip Market Dynamics

DRIVER

"Rising adoption of ADAS and autonomous driving systems"

The primary driver of Automotive Ethernet Chip Market growth is the increasing deployment of advanced driver assistance systems and autonomous driving technologies. Modern vehicles integrate multiple high-resolution cameras, radar modules, and LiDAR sensors, each generating gigabits of data per second. A single surround-view camera system can produce over 3 Gbps of raw data, which cannot be efficiently handled by legacy in-vehicle networks. Automotive Ethernet chips provide scalable bandwidth and deterministic performance, enabling real-time decision-making and sensor fusion. Regulatory mandates for safety features such as automatic emergency braking and lane-keeping assistance are further accelerating Ethernet chip adoption across mass-market vehicles.

RESTRAINTS

"High validation and qualification complexity"

A major restraint in the Automotive Ethernet Chip Market is the complexity and cost associated with automotive-grade validation and qualification. Ethernet chips must comply with stringent automotive standards for functional safety, electromagnetic compatibility, and temperature endurance. Automotive-grade semiconductor qualification can take more than 24 months and requires extensive testing across extreme operating conditions. Additionally, interoperability testing with multiple OEM-specific network architectures increases development timelines. Smaller semiconductor vendors face barriers due to high upfront investment requirements, limiting rapid market entry and slowing adoption in cost-sensitive vehicle segments.

OPPORTUNITY

"Expansion of software-defined and connected vehicles"

The rise of software-defined vehicles presents a significant Automotive Ethernet Chip Market opportunity. Vehicle software content is expected to exceed 500 million lines of code per vehicle, requiring high-speed, reliable in-vehicle communication. Ethernet-based architectures support scalable software platforms, centralized computing, and continuous feature upgrades via over-the-air updates. Fleet operators and mobility service providers increasingly demand connected vehicle platforms capable of real-time diagnostics and predictive maintenance. Automotive Ethernet chips enable these capabilities by supporting secure, high-throughput data exchange, positioning them as a core component of next-generation vehicle electronics.

CHALLENGE

"Cost pressure and integration with legacy networks"

A key challenge in the Automotive Ethernet Chip Market is balancing performance with cost efficiency while integrating Ethernet alongside legacy communication protocols. Many vehicle platforms still rely on CAN, LIN, and FlexRay networks, requiring gateways and protocol converters. This hybrid network approach increases system complexity and component costs. Automakers targeting entry-level and mid-range vehicles face tight cost constraints, limiting the speed of Ethernet adoption. Additionally, the need for specialized connectors, shielding, and cable assemblies adds to overall system costs, challenging widespread penetration across all vehicle categories.

Automotive Ethernet Chip Market Segmentation

The Automotive Ethernet Chip Market segmentation is primarily defined by chip type and vehicle application, reflecting how in-vehicle data transmission requirements vary by architecture and use case. Segmentation by type focuses on functional roles within the Ethernet network, while segmentation by application highlights differences in data volume, safety needs, and system complexity between passenger and commercial vehicles. Over 70% of newly developed vehicle platforms now use mixed Ethernet architectures, combining multiple chip types to optimize bandwidth, latency, and reliability across diverse automotive subsystems.

Download Free Sample to learn more about this report.

BY TYPE

PHY Chip: Automotive Ethernet PHY chips represent the foundational layer of Ethernet communication within vehicles, responsible for physical data transmission over single-pair twisted cables. These chips convert digital signals from controllers into analog signals suitable for automotive wiring environments and vice versa. More than 85% of current automotive Ethernet deployments rely on PHY chips operating at speeds such as 100BASE-T1 and 1000BASE-T1. A typical mid-range vehicle integrating camera-based driver assistance systems uses between 6 and 12 Ethernet PHY chips to connect cameras, displays, and domain controllers. PHY chips are designed to operate across wide temperature ranges, often from -40°C to 125°C, ensuring reliability under harsh automotive conditions. Automotive Ethernet PHY chips significantly reduce cabling complexity compared to traditional copper harnesses. Single-pair Ethernet cables can reduce wiring weight by nearly 30%, which directly contributes to improved vehicle efficiency. PHY chips also support electromagnetic interference resistance, a critical requirement as vehicles integrate more electronic components. In electric vehicles, PHY chips are increasingly used to connect battery management systems, inverters, and thermal control units, where low-latency communication below 1 millisecond is required for safe operation. 

TSN Chip: Time-Sensitive Networking chips play a critical role in enabling deterministic and synchronized communication across automotive Ethernet networks. TSN chips ensure that time-critical data such as braking commands, steering inputs, and sensor fusion outputs are transmitted with guaranteed latency and minimal jitter. In advanced vehicles, safety-related messages often require delivery within microsecond-level time windows, which TSN-enabled Ethernet chips are specifically designed to support. Approximately 45% of vehicles equipped with Level 2 and above driver assistance systems integrate TSN-capable Ethernet chips within their network architecture. TSN chips support features such as time synchronization, traffic scheduling, and frame preemption, allowing multiple data streams with different priority levels to coexist on the same network. For example, high-bandwidth video streams from surround-view cameras can operate alongside low-latency control signals without interference. In autonomous test vehicles, sensor fusion platforms process data from more than 20 sensors simultaneously, making TSN chips essential for maintaining deterministic performance. TSN chips also enable clock synchronization accuracy below 1 microsecond across the vehicle network, which is critical for coordinated control actions. As vehicles move toward centralized and zonal architectures, TSN chips are increasingly embedded within domain controllers and high-performance computing units. 

BY APPLICATION

Passenger Car: Passenger cars represent the largest application segment within the Automotive Ethernet Chip Market, driven by increasing integration of infotainment, connectivity, and advanced safety features. Modern passenger vehicles commonly include multiple high-resolution displays, surround-view camera systems, digital instrument clusters, and connected infotainment units. A single premium passenger car can generate more than 25 gigabytes of data per hour during normal operation. Automotive Ethernet chips enable efficient data handling across these systems, supporting smooth video streaming, real-time navigation, and seamless smartphone integration. Advanced driver assistance systems are a major contributor to Ethernet chip adoption in passenger cars. Features such as adaptive cruise control, lane centering, and automated parking rely on continuous data exchange between sensors and control units. Passenger cars equipped with multiple cameras typically require Ethernet connectivity for at least 70% of image data transmission. Additionally, over-the-air software updates are now supported in more than two-thirds of connected passenger vehicles, requiring high-speed in-vehicle networks to reduce update times and system downtime. Passenger cars are also at the forefront of adopting zonal and centralized electronic architectures. 

Commercial Vehicle: Commercial vehicles are an increasingly important application segment for the Automotive Ethernet Chip Market due to rising demand for fleet connectivity, safety, and operational efficiency. Heavy trucks, buses, and delivery vehicles are integrating more electronic systems to support driver assistance, telematics, and fleet management. A long-haul truck can operate for more than 3,000 hours annually, generating vast amounts of operational and diagnostic data. Automotive Ethernet chips enable reliable high-speed communication between telematics units, engine control modules, and advanced braking systems. Commercial vehicles often require robust and deterministic networking due to higher safety and durability requirements. Ethernet chips support real-time data transmission for systems such as electronic braking, stability control, and collision avoidance. In buses and coaches, Ethernet networks are used to manage passenger information displays, surveillance cameras, and connectivity systems simultaneously. 

Automotive Ethernet Chip Market Regional Outlook

The Automotive Ethernet Chip Market shows strong regional diversification driven by vehicle production volume, technology adoption, and regulatory frameworks. Asia-Pacific accounts for approximately 34% of the global market share, supported by large-scale automotive manufacturing and rapid electrification. North America follows with nearly 32% market share, driven by early adoption of advanced driver assistance and connected vehicle technologies. Europe contributes around 27%, benefiting from strong premium vehicle production and safety regulations. The Middle East & Africa region represents about 7% of the global market, supported by gradual adoption of connected and electric vehicles. Collectively, these regions account for 100% of global market share, reflecting varied maturity levels and technology penetration.

Download Free Sample to learn more about this report.

NORTH AMERICA

North America holds approximately 32% of the Automotive Ethernet Chip Market share, making it one of the most technologically advanced regions for in-vehicle networking. The region benefits from high penetration of advanced driver assistance systems, with over 85% of newly registered vehicles equipped with at least one ADAS feature. Vehicles in North America typically integrate a higher number of electronic control units compared to global averages, often exceeding 120 ECUs per vehicle, which increases the need for high-speed and reliable data communication. Automotive Ethernet chips are widely deployed to manage camera data, radar inputs, infotainment systems, and centralized vehicle controllers. The United States dominates the regional landscape, accounting for more than 75% of North American automotive Ethernet demand. Large-scale deployment of connected vehicle platforms and autonomous test fleets has accelerated Ethernet adoption. Autonomous test vehicles operating in North America generate terabytes of sensor data daily, requiring deterministic and high-bandwidth networks. Ethernet-based architectures help reduce latency and improve synchronization across these systems. In addition, electric vehicle penetration in North America continues to rise, with electric and hybrid vehicles representing over 20% of new vehicle sales in several states, further increasing Ethernet chip integration in battery management and powertrain systems. Canada and Mexico also contribute to regional growth. Mexico’s strong position as an automotive manufacturing hub has led to increased integration of Ethernet-enabled electronic architectures in export-oriented vehicle platforms.

EUROPE

Europe accounts for approximately 27% of the global Automotive Ethernet Chip Market share, driven by strong automotive engineering capabilities and strict vehicle safety standards. European vehicles are among the most electronically sophisticated in the world, particularly in the premium and luxury segments. More than 70% of premium vehicles produced in Europe incorporate Ethernet-based in-vehicle networks to support advanced infotainment, digital cockpits, and multi-sensor ADAS configurations. European automakers are early adopters of zonal and centralized electronic architectures, significantly increasing Ethernet chip utilization. Germany, France, and the United Kingdom are key contributors to the regional market. Europe places strong emphasis on functional safety, with vehicle systems required to meet rigorous performance and reliability benchmarks. Ethernet chips support deterministic communication necessary for systems such as electronic braking, steering control, and adaptive driving functions. In addition, Europe has a high concentration of electric vehicle production, with several countries reporting electric vehicle shares above 25% of new registrations. Ethernet-based communication is widely used to coordinate battery systems, charging interfaces, and thermal management. European automotive production volumes exceed 15 million vehicles annually, providing a substantial base for Ethernet chip deployment.

GERMANY Automotive Ethernet Chip Market

Germany represents approximately 24% of the European Automotive Ethernet Chip Market, making it the largest national contributor within Europe. The country is home to some of the world’s most advanced automotive manufacturing ecosystems, producing millions of vehicles annually across passenger and commercial segments. German vehicles are known for high levels of electronic integration, often incorporating multiple high-resolution displays, advanced driver assistance systems, and sophisticated powertrain control units. These features significantly increase demand for high-speed in-vehicle communication enabled by Ethernet chips. German automakers are leaders in the adoption of centralized computing and zonal architectures. Many newly developed vehicle platforms in Germany rely on Ethernet backbones to connect zonal controllers with central processing units. A single premium vehicle platform can integrate more than 10 Ethernet links operating at gigabit speeds. The country also has a strong focus on autonomous driving research, with extensive testing of automated vehicles on public roads. These test vehicles generate large volumes of sensor data, reinforcing the need for deterministic Ethernet networking. Electric mobility is another major driver in Germany. 

UNITED KINGDOM Automotive Ethernet Chip Market

The United Kingdom accounts for approximately 18% of the European Automotive Ethernet Chip Market, supported by a strong focus on vehicle innovation, electrification, and connected mobility. The UK automotive sector is increasingly oriented toward advanced technologies, including autonomous driving, intelligent transport systems, and software-defined vehicles. Vehicles developed and tested in the UK often integrate Ethernet-based networks to manage sensor data, infotainment, and connectivity functions. The UK is a key hub for autonomous vehicle trials, with hundreds of miles of designated test corridors supporting real-world deployment. Autonomous and semi-autonomous vehicles tested in the UK typically integrate dozens of sensors, each requiring synchronized data transmission. Ethernet chips play a central role in ensuring reliable communication across these systems. Additionally, the UK has a growing electric vehicle market, with electric and hybrid models accounting for a significant portion of new registrations. Ethernet-based communication is used extensively in battery monitoring, charging control, and thermal systems. The presence of advanced engineering centers and technology startups further supports Ethernet chip adoption. The UK automotive supply chain increasingly collaborates with semiconductor developers to integrate next-generation in-vehicle networking solutions. 

ASIA-PACIFIC

Asia-Pacific holds the largest share of the Automotive Ethernet Chip Market at approximately 34%, driven by massive vehicle production volumes and rapid technology adoption. The region produces more than half of the world’s vehicles annually, creating a substantial base for Ethernet chip deployment. Automakers in Asia-Pacific are rapidly integrating advanced infotainment, digital dashboards, and driver assistance features even in mid-range vehicles, increasing Ethernet penetration across mass-market segments. China and Japan are the dominant contributors, supported by South Korea and emerging automotive markets in Southeast Asia. Asia-Pacific has seen a rapid rise in electric vehicle production, with electric and hybrid models accounting for a significant share of new vehicle output in several countries. Ethernet chips are increasingly used to manage high-speed communication between battery systems, vehicle controllers, and advanced safety features. In addition, connected vehicle adoption is accelerating, with millions of vehicles equipped with real-time navigation, remote diagnostics, and over-the-air update capabilities. Automakers in the region are transitioning from legacy communication protocols to Ethernet-based architectures to reduce wiring complexity and improve scalability. Zonal architectures are gaining traction, particularly in electric and autonomous vehicle platforms. With strong manufacturing capacity, expanding domestic markets, and government support for smart mobility, Asia-Pacific remains the leading region in Automotive Ethernet Chip Market size and share.

JAPAN Automotive Ethernet Chip Market

Japan accounts for approximately 22% of the Asia-Pacific Automotive Ethernet Chip Market, supported by its advanced automotive manufacturing base and strong emphasis on quality and reliability. Japanese vehicles are known for high integration of electronic systems, particularly in safety, powertrain control, and infotainment. Automotive Ethernet chips are increasingly deployed to support camera-based safety systems, digital instrument clusters, and centralized vehicle controllers. Japan has a strong focus on hybrid and electric vehicles, which require precise coordination between battery systems, motors, and control units. Ethernet-based communication supports low-latency data exchange essential for smooth and safe operation. The country is also actively developing autonomous driving technologies, with extensive testing of automated vehicles in urban and highway environments. These vehicles rely on Ethernet networks to handle synchronized sensor data from cameras, radar, and LiDAR. Japanese automakers prioritize long-term reliability and functional safety, driving demand for automotive-grade Ethernet chips capable of operating under extreme conditions. As vehicle architectures continue to evolve toward centralized computing, Japan remains a key market within the Automotive Ethernet Chip Market landscape.

CHINA Automotive Ethernet Chip Market

China represents approximately 41% of the Asia-Pacific Automotive Ethernet Chip Market, making it the largest single-country market globally. The country is the world’s largest automotive producer, manufacturing tens of millions of vehicles annually. Rapid adoption of electric vehicles and intelligent driving features has significantly increased demand for high-speed in-vehicle communication. Automotive Ethernet chips are widely used in Chinese vehicles to support large infotainment displays, advanced connectivity, and multi-sensor ADAS platforms. Electric vehicles account for a substantial portion of China’s new vehicle production, and Ethernet networks are essential for managing battery systems, power electronics, and charging interfaces. Chinese automakers are also aggressively developing autonomous driving capabilities, integrating multiple cameras and sensors that require deterministic data transmission. Ethernet chips support these requirements while reducing wiring complexity and vehicle weight. Government support for smart mobility and connected vehicle infrastructure further accelerates Ethernet adoption. Domestic automakers increasingly design vehicles with Ethernet backbones as standard architecture. This combination of scale, innovation, and policy support positions China as a dominant force in the Automotive Ethernet Chip Market.

MIDDLE EAST & AFRICA

The Middle East & Africa region accounts for approximately 7% of the global Automotive Ethernet Chip Market share, reflecting a developing but steadily expanding market. Vehicle adoption in the region is increasingly influenced by connectivity, safety, and digital features, particularly in Gulf countries. Premium and imported vehicles with advanced electronic architectures drive early adoption of Ethernet-based in-vehicle networks. The Middle East has a growing fleet of connected and luxury vehicles that integrate advanced infotainment and driver assistance systems. Ethernet chips support high-definition displays, navigation systems, and safety features in these vehicles. In Africa, automotive production is expanding in select countries, with increasing focus on modernizing vehicle electronics. Commercial vehicles used in logistics, mining, and public transport are gradually integrating advanced safety and telematics systems supported by Ethernet communication. While adoption rates remain lower compared to other regions, infrastructure development and rising demand for connected mobility are driving gradual growth. As electric vehicles and advanced safety technologies gain traction, the Middle East & Africa region is expected to see increasing integration of Automotive Ethernet Chip Market solutions across passenger and commercial vehicles.

List of Key Automotive Ethernet Chip Market Companies

• NXP
• TI
• Broadcom
• Marvell
• Realtek
• Motorcomm
• JLSemi
• by Type
• PHY Chip
• TSN Chip

Top Two Companies with Highest Share

• NXP: holds approximately 38% share due to strong penetration across ADAS, infotainment, and zonal vehicle architectures.
• Broadcom: accounts for nearly 24% share supported by high adoption of multi-gigabit Ethernet solutions in premium vehicles.

Investment Analysis and Opportunities

Investment activity in the Automotive Ethernet Chip Market remains strong as vehicle architectures rapidly evolve toward centralized and software-defined designs. More than 65% of global automotive semiconductor investment is now directed toward connectivity, processing, and networking technologies. Automotive Ethernet chips benefit from this shift as they are core components in next-generation vehicle platforms. Over 70% of newly announced automotive electronics investments focus on improving data bandwidth, latency control, and system scalability. Strategic investments are also rising in manufacturing capacity, with nearly 45% of suppliers expanding fabrication and packaging capabilities to meet automotive-grade reliability standards.

Opportunities are particularly strong in time-sensitive networking and multi-gigabit Ethernet solutions. Around 55% of upcoming vehicle platforms are expected to integrate Ethernet as the primary in-vehicle backbone. Electric vehicles present another major opportunity, as Ethernet-enabled communication is used in more than 60% of new battery management and power control designs. Additionally, autonomous vehicle programs allocate nearly 30% of their electronics budgets to sensor networking and data transmission technologies. These trends create long-term investment opportunities across chip design, validation services, and system integration within the Automotive Ethernet Chip Market.

New Products Development

New product development in the Automotive Ethernet Chip Market is focused on higher bandwidth, lower latency, and improved functional safety. More than 50% of newly launched automotive Ethernet chips support gigabit or multi-gigabit speeds to handle high-resolution camera and sensor data. Vendors are increasingly integrating advanced diagnostics and security features directly into chips, with over 40% of new designs including built-in monitoring for fault detection and data integrity. Support for multi-drop Ethernet technology has also expanded, enabling cost-efficient sensor connectivity across vehicle zones.

Another major development area is power efficiency and compact design. New-generation Ethernet chips achieve up to 35% lower power consumption compared to previous designs, supporting energy efficiency goals in electric vehicles. Packaging innovations have reduced chip footprint by nearly 25%, allowing easier integration into space-constrained vehicle control units. As vehicle software complexity increases, product development continues to prioritize compatibility with centralized computing and future software upgrades across diverse vehicle platforms.

Five Recent Developments

• Expansion of multi-gigabit automotive Ethernet solutions: In 2024, several manufacturers expanded their product portfolios to support data rates above 1 Gbps, addressing increasing sensor data loads. These solutions target vehicles with more than 12 cameras and multiple radar units, improving real-time data handling efficiency by over 40%.
• Integration of enhanced functional safety features: New Ethernet chips introduced in 2024 include improved safety monitoring capabilities, supporting redundancy and fault tolerance. Approximately 60% of these new products are designed to meet advanced safety requirements for braking, steering, and automated driving systems.
• Launch of low-power Ethernet chips for electric vehicles: Manufacturers released Ethernet chips optimized for energy efficiency, reducing communication-related power consumption by up to 30%. These chips are increasingly used in battery management and thermal control systems within electric vehicles.
• Adoption of multi-drop Ethernet technology: In 2024, suppliers introduced solutions supporting multi-drop networking, enabling multiple sensors to connect through a single Ethernet line. This development reduces wiring complexity by nearly 20% and lowers overall system weight.
• Expansion of automotive-grade manufacturing capacity: Chipmakers increased automotive-qualified production lines in 2024, with capacity expansions of more than 25% to address rising demand from global automakers transitioning to Ethernet-based architectures.

Report Coverage Of Automotive Ethernet Chip Market

This report provides comprehensive coverage of the Automotive Ethernet Chip Market, analyzing technology trends, segmentation, regional performance, and competitive dynamics. It examines market distribution across chip types, including PHY and TSN solutions, and evaluates adoption patterns across passenger and commercial vehicles. Regional analysis covers North America, Europe, Asia-Pacific, and Middle East & Africa, collectively representing 100% of global market activity. The report incorporates percentage-based market share analysis to highlight regional and country-level contributions.

The report also assesses investment patterns, product development trends, and recent manufacturer developments shaping the competitive landscape. More than 70% of the analysis focuses on emerging vehicle architectures, including zonal and centralized computing platforms. Coverage includes evaluation of safety, connectivity, and performance requirements influencing Ethernet chip adoption. By providing fact-based insights without revenue dependency, the report delivers a clear understanding of current market structure, future opportunities, and strategic positioning within the Automotive Ethernet Chip Market.